Wednesday, October 30, 2019

Does Punishment Deter Crime Essay Example | Topics and Well Written Essays - 1250 words

Does Punishment Deter Crime - Essay Example ed as a justified step to make the criminal realize his act of omission and offense that is committed and also as an attempt to give justice to the person or people against whom it has been committed. The changing paradigms of the emerging new pluralistic society have necessitated the need to study the wider implications of punishment for the various types of crimes that are becoming a regular feature of the American society. The punishments which were supposed to serve as examples for others to refrain from crimes are increasingly becoming ineffectual. Hence, in the recent times, crime and punishment have become the most controversial issues and crucial public policy questions, especially in America. Punishment for crimes has primarily been implemented for four major reasons: retribution; deterrence; rehabilitation; and social protection. These four factors are significant motivators for effectively combating crimes against the society and serve as vital public policy decisions while disbursing justice. Criminal justice has seen tremendous changes in the level of punishment and politicians, academicians and social scientists have vastly differed in the use or misuse of the official machinery and the justice system that decides and awards the punishment. The one most vital point that has come through the various public debates is the long term sustainability of the wider objectives of the punishment; whether the punishment has served as effective deterrent? Retribution refers to the concept that the criminal deserves punishment. The adage ‘tit for tat’ or ‘eye for an eye’ becomes the main objective of the punishment. Crime has been committed and therefore the criminal must be paid back in the same manner or something which is as bad as his crime. In the modern times and in the civilized society, this act of vengeance is neither considered to be morally right or just because it would bring our action at par with that of criminal. Hence, our actions need to

Sunday, October 27, 2019

Research Methodology into Ratio Analysis of HSBC Bank

Research Methodology into Ratio Analysis of HSBC Bank In this project my aim is to analysis the Ratio Analysis to find financial position of the HSBC bank by using the financial tools and also to know the functions of Internet Banking System in HSBC Bank. This study based on financial statement such as Ratio analysis and financial performance. This project helps to identify and give suggestion the area of weaker position of business transaction in HSBC. This study is made to evaluate the Ratio analysis as per trend analysis. Here I have given the Title, Aim, Objectives of the project, Introduction and background of the company chosen. It also gives the summary regarding the literature review, methodology using for the research, data collection methods and data analyzing procedures. Introduction: Finance is very essential for every business to run successfully. To run the business every organization will need financial support. In our present economy finance is defined as the provision of money at the time when it is required. Every enterprise whether big or small needs finance to carry on its target. In fact finance is so indispensable today. It can be said as blood of an enterprise. Without adequate finance no enterprise can possible accomplish its objectives. In the early years of its evolution it was treated synonymously with the rising of funds. In the current literature pertaining to financial management a broader scope so as to include in addition to procurement of funds efficient use of resources is universally recognized. Nowadays internet is widely used by all sectors of people. Today bank has introduced various facilities through internet. E-Banking is a revolution that changes the banking system around the world. E-Banking is more comfortable for the customers and bank. Title: Critically analyzing the ratios of HSBC bank to study the financial performance of bank during 2010-2011 and also study the functions of internet banking system in HSBC bank. Aim: To study the financial performance of HSBC bank by analyzing the financial ratios from the past five years financial data and also study the role of internet banking system in HSBC bank. Objective of the study: To analyze and evaluate the financial performance of HSBC Bank To study the growth of HSBC in terms of comparative analysis and trend analysis of financial statements for the past five years, from 2006 to 2010. To study the roles of Internet Banking in HSBC To review the benefits of internet banking to customer and bank To make suggestions recommendations for improving the financial position Rationale: Personal Rationale: As I am a finance student, am very much interested in doing the ratio analysis of the company because of that we can able to know the financial performance of any company. I am very eager to know the financial status of the HSBC bank always. Because this bank is globalized bank, it is in every part of the world. Now it has introduced the lot of facility in Internet banking that benefits the customers. I have the relationship with the bank for the past five years. So, I personally interest in doing with HSBC Bank financial performance and internet banking sector. Organizational Rationale: As it is bank, we have wide range of information available in website, articles, journals, magazines and newspapers. HSBC employees are very friendly to their customers. They are always ready to explain their roles of internet banking system. For the financial data, we will able to get the financial statement from their website so there is no lack of information availability. Policy Rationale: The system and the procedures followed by the HSBC bank is also one of my interests to choose the HSBC bank. This bank follows the banking rules and regulations given by the government and fair trade practice. Thats make the customer safety banking. In internet banking system, there are many options for doing the transaction easily and safely. Academic Rationale: There are more resources available for doing this work. There are many financial books available to elaborate the ratio analysis. We have studied in deep about the ratio analysis and Internet banking system. IMPORTANCE OF THIS STUDY The subject matter of financial management is of immense interest for every financial analyzer. It needs special attention because of the complexities involve in managing cash in present day banking function. The important aspect is the estimation of how much of finance. The business organization requires and for what purpose. The most important area of financial management is the working capital management. Here the study tries to reveal the banks position and performance by evaluating the relationship between various components parts of financial statements. Ration analysis has been taken as a tool in assessing the performance of the company in respect of the following aspects. Liquidity Position .Long-term solvency. Profitability. Activity. This study helps to know the usage and the benefits of internet banking system This study helps to study the functions of internet banking in UK HSBC bank Literature Review: 1 RATIO ANALYSIS Ratio analysis is one of the techniques of financial analysis where ratios are used as a yardstick for evaluating the relationship between component parts of financial statements to obtain a better understanding of the firms position and performance. It is used as tool by the company or individual to analysis the quantitative performance of the company financial statement. Meaning Ratio is relationships expressed in mathematical terms between figures which are connected with each other in some manner. Ratio will be calculated from current year figures and it is compared with previous year in order to know the financial performance of the company. It is defined as the systematic use of ratio to interpret the financial statements so that the strengths and weaknesses of a firm as well as its historical performance and current financial condition can be determined. The importance of ratio analysis relies in the fact that it presents facts on a comparative basis Conclusions can be drawn regarding the liquidity position of a firm. It is useful for assessing the long-term financial viability of a firm. It throws light on the degree of efficiency in the management and utilization of its assets. It helps in inter-firm comparison and also with industry averages. Liquidity Ratios: It is the ratio which is used to determine the companys capacity to pay its short- period debt obligations. If the value of the ratio is high, then the margin of safety will become high so that the company able to cover its short term debts. Liquidity ratio includes Current ratio, Quick/Acid ratio and Operating cash flow ratio. Current Ratio It is a quantitative relationship between current assets and current liabilities and indicates and enterprises ability to meet the current obligation. Current assets refer to liquid resources and must be sufficient enough to pay current liabilities when they mature. A relatively high current ratio is an Indication that the firm has ability to pay its current obligations in time as and on the other hand a relatively low current ratio represents that the firm shall not be able to pay its current liabilities in time without facing difficulties. An increase in the current ratio represents improvement in the liquidity position of a firm while a decrease in the current ratio indicates that there has been deterioration in the liquid assets of the firm. The ratio equal to the rule of thumb is 2:1. Quick/Acid Test Ratio: The ratio is ascertained by companys liquid assets and current liabilities. Here liquid assets are those assets which are immediately convertible in to cash without much loss. It is also known as liquidity ratio. It shows the ability of the enterprise to meet its short term obligation without sale and collection of inventories. LeverageRatios: It is the ratio which is used to calculate the financial leverage of the company inorder to know the methods of financing using by the company and to measure the ability of the company to meet its financial obligations. Debt-equity Ratio This ratio indicates the relative proportions of debt and equity in financing the assets of a firm. One approach is to express the debt-equity ratio in terms of the relative proportion of long-term debt and shareholders equity. The debt considered here is exclusive of current liabilities. It is an important tool of financial analysis to appraise the financial structure of a firm. A high ratio shows a large share of financing by the creditors of the firm, a low ratio implies a smaller claim of creditors. Interest Coverage Ratio : These ratios are computed from information available in the profit and loss account. It is also known as time-interest earned ratio. This ratio measures the debt servicing capacity of a firm insofar as fixed interest on long-term loan is concerned. It is determined by dividing the operating profits or earnings before interest and taxes (EBIT) by the fixed interest charges on loans. Proprietary Ratio: This ratio indicates whether the firm is employing a reasonable proportion of debt or if heavily loaded with debt in which case its solvency is exposed to serious strain. This ratio relates the owners/proprietors funds with total assets. The ratio indicates the proportion of total assets financed by owners. PROFITABILITY RATIOS: This ratio helps to access the ability of business in order to generate the earnings of the business by comparing the expenses and relevant costs during the specific period of time. Net profit Ratio: This measures the relationship between net profits and sales of a firm. Depending on the concept of net profit employed. A high net profit margin would ensure adequate return as well as enable a firm to with stand adverse economic conditions when selling price is declining cost of production is rising and demand for the product is failing. A low net profit merging would have the opposite implications. Return on Assets: Thus profitability ratio is measured in terms of this relationship between net profit and assets. This may also be called profit-to-asset ratio. The concept of net profit may be net profits after taxes net profits after taxes plus interest and net profits after taxes plus interest minus tax savings. Assets may be defined as total assets fixed assets and tangible assets. Return on capital Employed: The term capital employed refers to long-term funds supplied by the creditors and owners of the firm. Here the profits are related to the total capital employed. It can be computed as The capital employed provides a test of profitability related to the sources of long-term funds. The higher the ratio the more efficient is the use of capital employed. A comparison of this ratio with similar firms with the industry average and over time would provide sufficient insight into how efficiently the long-term funds of owners and creditors are being used. Debtor turnover ratio: Debtor turnover ratio indicates the number of times the debtors are turned over during the year. Generally if the value of debtor turnover is high, then there is more efficient in the management of debts and sales. OTHER RATIOS Fixed Assets Ratio This ratio relates the net assets and the long-term funds. Here the ratio should be high. That is the handling of fixed asset should be greater than the long-term funds at an appropriate level. E-Banking: Electronic banking system is the system that allows the individual to do the banking activities by sitting in one place. Electronic funds transfer means doing the financial transactions electronically. This is used for the number of different activities like electronic payments and card transactions where the holder makes payment by using their credit or debit cards.[Brain Dixon and Mary Dixon 2006] Internet banking is also called as online banking, it is an outgrowth of PC banking. Internet banking uses the internet as the delivery channel for conducting banking activity, it is used for the purpose of transferring funds, paying bills, helps to checking and saving account balances, paying mortgages and also help to purchase financial instruments.[Benton E Gup 2005] According to Richard H Baker, advancement in technology helps to develop the system of internet banking. According to industry analysts, internet banking provides many facilitiies Able to access the banking at any time World wide connectivity Very easy to access the information by transacting data Direct customer control of international movement of funds without intermediation of financial institutions in customers jurisdiction According to the report of Global Market for Internet Banking, more than 172 banks in Europe are running the internet banking system and they are very successful in running online banking. RESEARCH METHODOLOGY RESEARCH Research is a process in which the researcher wishes to find out the end result for a given problem and thus the solution helps in future course of action. The research has been defined as A careful investigation or enquiry especially through search for new facts in branch of knowledge RESEARCH DESIGN Redman and Mory (1923) defined research as a systematic effort to gain new knowledge According to Clifford Woody research comprises defining or redefining problems, formulating hypothesis or giving solutions, collecting, organizing, evaluating the data, making deductions and reaching conclusions and at carefully testing the conclusion to determine whether they fit the formulating hypothesis The research design used in this project is Analytical in nature the procedure using, which researcher has to use facts or information already available, and analyze these to make a critical evaluation of the performance. With particular reference to working capital management, for the prosecution of the study, both the primary and secondary data. DATA COLLECTION METHOD: Primary Data: Primary data is the information collected by the researcher in first hand. This data is collected by the researcher inorder to analysis the research. Primary data is collected from the field organization selected that is from the employees, customers and observing the real life situations. The main benefit of the primary data is collected only for the specific study so it is more relevant to the study. But there is disadvantage for the collection of primary data it involves more cost and time. It is not suitable for short term study. Primary data for this proposal will be collected from the employees and customers of HSBC bank inorder to know how they run the internet banking system and the functions and benefits of internet banking system in HSBC bank. Primary research may be quantitative and qualitative research. Qualitative research is the method where the researcher set the questionnaire which will give to large number of respondents (Hair, Wolfinbarger, Ortinau, and Bush, 2008, p81). Based on the responses the data will be analysed. In this study, questionnaire will be given to the customers and employees of HSBC bank to analyse the data regarding the functions of Internet Banking. Secondary Data Secondary data is the information which is collected already and it is used for some other studies by different researcher. This data not only used for the current study. The sources of secondary data are books, journals, articles, newspapers, internet, government, corporate reports and library. The advantage of this data it is easily available and also very cheap compared to primary data. In this study we are using secondary data for the analyses of ratio in order to know the financial performance of HSBC bank. From the annual reports maintained by the company. Data are collected from the companys website. Books and journals pertaining to the topic. Research Approach: There are two types of research approaches Inductive and Deductive approaches. Inductive approach is the approach that starts with specific objectives and become generalized. It begins by identifying the issue by observation or being informed. Deductive approach is the approaches where the conclusions derived from the situation. It begins with general situation and ends by identifying the specific issue. Arguments based on the rules, laws and regulation will be using deductive approaches and the argument based on the observations will be using the inductive approaches. SAMPLING PROGRESS Sampling: It is the process of choosing small number of people for doing the research from the large population. That sample group will be tested, analyzed by assuming that sample group represents the entire group (Crouch, S. and Housden, M., 1996, p116). Sampling Unit In this research the target populations are the customers of HSBC Bank Alperton Branch. The sizes of the sampling will be 100 customers. Sampling type will be random choosen among the large population group. From the total sample size the study will be done for the 10 customers and 5 employees of HSBC bank. Ethnography procedure will be used for analyzing the data based on the data collection method. In this method it takes account of words, context and non-verbals. STATISTICAL TOOLS Tool for Data Collection Questionnaire will be used as a tool for data collection as it provides the advantages of allowing the respondents to answer at their convenience and faster data collection. The questionnaire explicitly stated the purpose of study as academic and assured confidentiality of information solicited from the respondent. Percentage method This method is used in making comparison between two are more series of data. Percentages are used to describe relationship. Percentages can also be used to compare the relative terms, the distribution of two or more series of data. The data collected through questionnaire response method was analyzed in the following manner: Raw data will be coded and tabulated and the tabulated data will be converted into percentages, to show the percentage of opinion among respondents. Percentage analysis thus involves the simple interpretation / analysis of the various items taken up in the questionnaire on a percentage basis from the data collected. Interpretations of the graphs also include mean scores obtained by the organization on every aspect / item as calculated. Number of respondent Percentage of Respondents =  ­Ã‚ ­Ã‚ ­Ã‚ ­Ã‚ ­Ã‚ ­Ã‚ ­Ã‚ ­Ã‚ ­Ã‚ ­___________________________________ * 100 Total number of people questioned Weighted average method Weighted average method is defined as an average whose component items are multiplied by certain value (weights) and the aggregate of the products are divided by the total of weights In the Weighted Average Method, the weighted average can be calculated by the following formula K XW = ÃŽÂ µ WX/ ÃŽÂ µX Here XW represents the weighted average X1, X 2, X3à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦.Xn represents the value for variable values W1, W2, W3 à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Wn represents the weight age given to the variable. Steps:- Multiply the weights(W) by the variables(X) to obtain WX Add all WX to obtain ÃŽÂ µWX Divide ÃŽÂ µWX by sum of the weights (ÃŽÂ µX) to get weighted average. Correlation: Correlation is the techniques of determining the degree of correlation between two variables in case of ordinal data where ranks are given to the different values of the variables. Spearmans coefficient of correlation (or) 1 6 à ¢Ã‹â€ Ã¢â‚¬Ëœdi  ² r = _____________ n (n ² 1) TOOLS OF ANALYSIS Ratio Analysis. Comparative Balance Sheet. Trend Analysis Conclusion: This dissertation proposal starts with the introduction of finance, and helps to know the importance of finance for banking sector. The researcher will work towards the financial ratios of HSBC bank from the sources of annual reports, financial statements like balance sheet in orer to know the financial position of HSBC bank and analyze the role of internet banking in HSBC by getting the data from the bank customer and employees.

Friday, October 25, 2019

Stuck In Time :: essays research papers

It's 2139 and Charles Stimatra, head of the ITEDRC (International Time Exploration and Defense Research Company), has figured out a formula and machine enabling one person at a time to be transported to another time. The glitch he is working on is the person can only be estimated where he will be when he gets transported. The closest they can get is three kilometers within the configured destination. Seven out of twenty three men have been lost and killed because one ended up inside a rock, another 300 feet in the air and the last got stuck in another person causing a time malfunction and creating an explosive object. The others whereabouts are unknown. The other men went back again and tried to save as many from dying as they could because it could cause a chain reaction through history and completely change everything. The future is a whole different matter. Since the future can always be changed, sending someone to the future could change the past. Charles and his associates are not the only ones experimenting in time travel. These people are called hackers, which is why there are Time Police. They devote their lives to protecting the past. For example, if someone went back and killed Hitler, it could change everything. The Time Police stop these people from doing so. Captain of the Time Police used to be Sergeant Carl Lamberg. He was one of the many that had to erase their identity and lives so they could protect the future of the human race. Which brings us to the story of how Carl died. How do I know? Because I am Carl Lamberg. "Control, I'm ready to transmit. Confirm safety for time transport." I let go of the intercom button and waited for the confirmation. "This is Control, we confirm transport. You have the go ahead." This is my thirteenth time and I still get nervous. I reach for the bottom of my shirt to wipe my forehead but the chair starts to shake and I end up in 1642 five feet above the ground. I drop and absorb the impact with my knees. My mission is to find a gold transport to a king and stop a hacker from robbing it. Hackers can easily kill people from the past because they use modern weapons, while the people they are robbing have to reload after every shot. I brush myself off and set off down the road.

Thursday, October 24, 2019

Globalization itself Essay

Globalization is not value free; rather, the pressures to conform to universal standards of conduct and competitive performance force organizations and individuals to assimilate new values, which may be in conflict with local cultural values and practices. This requires the individuals, organizations, and nations to build the necessary mind-set, competencies, capabilities, and capacities to manage the transformations associated with globalization. Globalization is founded on competitiveness. To remain competitive, actors must â€Å"continue to innovate† (Anton, 1995). Innovations are based on advancements in science, technology, and commercialization. It is, therefore, logical to add to the center the institutional actors involved in promoting science, technology, and innovation. This includes universities, research laboratories, startups, entrepreneurs, knowledge workers, venture capitalists, management experts, consulting firms, stock markets, shareholders, and corporate directors. The United States currently leads the world in investing in science, technology, and innovations and remains the most dominant actor at the center. A key lesson we learn from these experts is that globalization can and must be managed. Since globalization affects all nations, governments, businesses, communities, and individuals, the best we can do is fight back or respond in kind in order to take advantage of its opportunities and to minimize its potential adverse consequences. This requires a â€Å"strategic approach to globalization† (Fischer, 2000). Nations, governments, businesses, institutions, communities, and individuals should not see themselves as helpless victims of globalization; rather, they should actively take the initiative to understand the nature of globalization, its causes, and its consequences on the ground; assess their own opportunities, strengths, and limitations; and develop realistic goals and a plan of action for managing globalization. It is not easy, and there are no guarantees or shortcuts, but the strategic approach is better than isolation or surrender. Doing it in partnership with others increases the chances of success and mitigates against some of the negative consequences. The management literature is rich with descriptive materials on how businesses can become globally strategic and competitive in the twenty-first century. (Hirst, 1999) Nations, government institutions, communities, and individuals can draw on this body of knowledge to develop their own tailor-made strategic directions and action plans for managing globalization. In its 1999 Human Development Report on globalization with a human face, the United Nations Development Program (UNDP), one of the U. N. specialized agencies doing extensive work in developing countries, provides a framework and guidelines for managing globalization. Recognizing that globalization is characterized by new markets, new tools, new actors, and new rules, the report challenges governments and the international community to find rules and institutions for stronger governance at the local, national, regional, and global levels. Globalization is multidimensional and, therefore, means different things to different people across time and space. Globalization is about transformational change with intended and unintended adverse effects. Since its dynamics and consequences are not fully predictable, some of its aspects may be emphasized or deemphasized at different times for different regions, countries, or societies. (Friedman, 2000) Yet, because the key drivers of globalization come from industrialized countries, individual developing countries have no realistic option but to participate in the globalization process. Many people are openly opposed to globalization: the concept, its practice, and its consequences. This is in spite of its actual and potential benefits to both rich and poor countries. This opposition, if left unchecked, threatens to push the world back to the dark days of protectionism and closed societies reminiscent of the Cold War. Many world leaders have, at one time or another, expressed doubt, apprehension, qualified support, or outright opposition to globalization and have questioned its moral justification. However, Globalization can be and in most cases has been, good for cultural diversity and development. By contributing to â€Å"liberalization, rising incomes, increased use of technology, better education, and global migration,† (Prakash & Hart, 1997) globalization helps to create multiple environments in support of cultural and interactive diversity. It allows people to experiment with alternative models of development, while at the same time borrowing ideas and practices from other cultures and institutions. It provides people with the opportunity to enjoy freedom for their own culture and, at the same time, be exposed to other cultures. It allows weaker and smaller cultures to coexist alongside the big and powerful cultures. It allows minor or provincial languages and remote cultures to connect with other cultures. As it presently exists in the world today, globalization is an asymmetrical and imperfect system. To be committed to globalization is to understand its lack of symmetry among the players and its inherent imperfections. Therefore, globalizing countries, governments, businesses, institutions, and communities must commit themselves to work toward its improvement. For developing countries, this means, among other things, not to promote globalization as a â€Å"panacea for all problems,† (Micklethwait, 2000) but to build the necessary institutional capacities and competencies for the defense and improvement of globalization for the greater benefit of all citizens. Resources Anton, D. J. 1995. Diversity, Globalization, and the Way of Nature. Ottawa: International Development Research Centre, 1995. Fischer, T. C. 2000. The United States, the European Union, and â€Å"Globalization† of World Trade: Allies or Adversaries? Westport, CT: Quorum. Hirst, P. , and G. Thompson. 1999. Questioning Globalization: The International Economy and the Possibilities of Governance. Cambridge: Polity Press. Friedman, T. L. 2000. The Lexus and the Olive Tree: Understanding Globalization. New York: Anchor Books. Prakash, A. , and J. A. Hart. 1997. Globalization and Governance. London: Routledge. Micklethwait, J. , and A. Wooldridge. 2000. A Future Perfect: The Challenge and Hidden Promise of Globalization. New York: Random House.

Wednesday, October 23, 2019

Swot Analysis Fed Ex Indianapolis Hub 2012

Marketing Strategy Falls School of Business – MBA program Dr. Michael D. Wiese – Fishers Campus Proposal to Management of Market Audit – SWOT / Environmental Analysis By: Jeffrey K. Lockhart October 02, 2012 To: Another open letter to the management of Federal Express Corporation (FedEx Corp): Ladies and Gentlemen, I am currently involved in an MBA marketing class at the Falls School of Business – Anderson University.I have been asked, as part of a marketing audit, to assist in building a marketing plan that analyzes a portion of the â€Å"Situation Analysis† of such plan, for a particular Strategic Business Unit (SBU), or actual work unit, at my place of employment. The process for building a marketing plan starts with a detailed situation analysis of the market and business. The primary purpose of a situation analysis is to uncover key performance issues that usually go unnoticed in day-to-day business operations. The output of the situation analy sis is used to build the marketing strategy.To accomplish this I will discuss the Strengths, Weaknesses, Opportunities and Threats (SWOT) / Environmental Analysis, with respect to current market forces, the business’s competitive position, and its current performance for the identified SBU described below. I will do this by listing the internal strengths and weaknesses that impact the SBU’s ability to serve FedEx customers, constituency; as well, as directly meet the FedEx mission. Also, I will list some of the external/environmental factors that are impacting/shaping the ability of the unit to serve its customers, constituency; as well, as meet the FedEx mission.Finally, as part of the SWOT I will discuss the opportunities and threats that as managers you should be aware of; and for which you will want to manage. Identification of the Specific Business Unit (SBU): FedEx Express – Indianapolis Hub – Sec. 9 – Dallas / Ft. Worth ramp (DFW) SWOT Analy sis: FedEx Express – Indianapolis Hub – Sec. 9 – Dallas / Ft. Worth ramp (DFW) Internal Strengths:| Internal Weaknesses:| Recognized as Industry Global Market Leader/ largest transportation company; providing fast reliable service for more than 3. million package shipments each business day; 10m + each day from the DFW ramp alone. (I)| Limited freight volume handling ability; with the DFW SBU only having 35 employees; and 16 slides, and four hours in which to perform each night’s sort. (I)| Leading-edge information and engineering technology (the Matrix). Current package tracking system is state of the art. This provides tremendous advantage for the various ramps in the Indy hub. (I)| Reliability on other areas of the hub to perform their job in a satisfactory manner.Non-con drivers making timely deliveries of freight to the sort process. (I)| Worlds largest privately owned Fleet of cargo airplanes (660 jets). There are currently 90 gates for planes comin g in and out of the Indy hub; DFW manages 2 of them each sort. (I)| Late in-bound planes can cause the entire sort to be delayed; resulting in late out-bound flights to the freights final destination. (I)| Boeing 777’s now fly into the Indy hub; lowering emissions, with less fuel consumption, this aircraft reduces the environmental and also noise impact of entire operations. I)| Costs and frequency of asset replacement / investment is very expensive. Keeping a fleet of 660 aircraft maintained; as well, the constant new purchase of aircraft is a drain on company capital. (I)| Indianapolis is the second largest distribution hub in the company; only behind home-base Memphis, TN. (I)| Plane â€Å"strikes† by tug drivers can be very costly incidences for the company. The DFW ramp had no aircraft strikes by its drivers during 2011; and none year to date 2012. (I)| FedEx Invented Express distribution. The Indy hub continues to grow due to this attribute of FedEx. I)| The cost in penalties for not meeting required express shipping deadlines for each package can add up to a significant total annual dollar cost. (I)| Providing rapid, reliable, time-definite delivery to more than 220 countries and territories; the DFW ramp participates in this. (I)| | Customer Service is provided by significant training of each DFW ramp worker in the correct processing/application of their job. (I)| | Below is a list of â€Å"External Environmental Factors† affecting the FedEx marketing strategy include both those that would be considered strengths; as well as those considered to affect the company in a negative manner.External Environmental Factors – Strengths:| External Environmental Factors – Weaknesses:| FedEx has contracted long-term with the US Postal Service to deliver all of its Global Express Guaranteed international shipping freight. It features 1-3 business days to more than 190 countries (Money-back guarantee). (E)| Business is subject to ma jor economic downturns. In the 2000 downturn many companies looking for a way to save money stopped shipping, or moved to cheaper methods such as surface shipping. This resulted in reduced routes and limited lay-offs. E)| FedEx now connects markets that comprise more than 90% of the world’s gross domestic product within one to three business days. (E)| A recent survey found that 84% of â€Å"satisfied† customers will â€Å"jump ship† for a better deal if the opportunity arises. With the marketplace becoming increasingly commoditized, customer retention has become a critical part of business strategy. (E)| FedEx measures customer service and loyalty via two separate indexes; a 1% increase in the Loyalty Index has been found to be worth approximately $100mm of additional annual business. E)| Inclement weather is definitely a negative environmental factor that can affect timely delivery of FedEx express delivery. Winter snows and summer thunder storms definitely pr esent challenges to the various FedEx markets. | FedEx Express is named among the top five of the â€Å"World’s Best Multinational Workplaces† by Great Places to Work Institute. (E)| The TSA adopted new rules enhancing many of the security requirements for air cargo on both passenger and all-cargo aircraft. It is reasonably possible that these new rules, or other future security requirements for air cargo carriers, could impose material costs on FedEx. FedEx Express is named Super Eco-Airline of the Year 2012 by Air Transport World. (E)| The FAA’s regulatory authority relates primarily to operational aspects of air transportation, including aircraft standards; as well, personnel and ground facilities, which may from time to time affect the ability of FedEx to operate its aircraft in the most efficient manner. | FedEx Corp ranks ninth in the business Super-brands list and is the only company representing the transportation industry in the top 20, making it a lead er in its field. E)| FedEx Express participates in the Civil Reserve Air Fleet (â€Å"CRAF†) program. Under this program, the U. S. Department of Defense may requisition for military use certain of FedEx Express’s wide-bodied aircraft in the event of a declared need, including a national emergency. | Opportunities and Threats are part of the SWOT analysis that must be examined by managers involved in the development of a marketing plan/strategy include the following.. Opportunities| Threats| The DFW ramp has the opportunity to grow its portion of the Indy hub market share if its manpower is increased.It is only limited by itself. If the volume will support more staff it will be allowed. | Personal injuries in the workplace can affect the DFW ramp’s overall performance ratings. Thus, limiting the advancement of its managers. | The DFW ramp can control its freight misflows by continuing the training of its personnel. This will result in improved performance rating s for the ramp and additional opportunities for its managers. | Conflicts between personnel can negatively affect, and ultimately change the â€Å"mojo† of the ramp’s team performance.Teamwork is a very important attribute, necessary for the ramp to meet its volumes and timelines. | The DFW ramp has the opportunity every night to help solidify the loyalty of 10m customers to FedEx. | If it does not do its job correctly the DFW ramp has the opportunity to give 10m customers a reason to use UPS for their next shipment of freight. | Each DFW ramp staff has the opportunity to quash the various FedEx competitors by performing their job with excellence. | Unionization is always a potential threat to the current positive work environment.This would not be a good thing for the company. | By doing their job correctly, identifying suspicious packages each of the DFW ramp staff has the opportunity to act in place of a DEA or BATF agent. | Drugs trafficking and potential terrorism are definite threats to FedEx with each sort that takes place. | Theft prevention can enhance FedEx’s reputation in the market place. Each DFW ramp staff has the opportunity to act as eyes and ears against theft of freight being shipped through their area. | Individual theft of various pieces of freight can hurt FedEx’s reputation in the market place. |

Tuesday, October 22, 2019

Reflection on A&P ---- Be Your Self essays

Reflection on A&P Be Your Self essays In the movie industry there are directors trying to copy someone else ¡s style, wishing to create current film favorite. Among the entire scholars there are writers trying to imitate more successful authors. Nowadays people tend to be the product of other ¡s decision rather than what he really was, living in the world of other ¡s points of view. What ¡s more people regard it a taboo to defy the authority or the traditional value. However, the protagonist - Sammy in Updike ¡s story did make difference( you may think he didn ¡t weigh his option carefully to make a wise choice) He is my true model of integrity, being completely true to what is inside him - doing what he knew was right. Regardless of the immediate cost or sacrifice, he chose what he feels he must do, based on what if proper, not on what is expedient. He quitted his job for he disliked the way his manager treat the three bathing suit girls  ¡ After this come in here with your shoulders covered. It ¡s our Policy. ¡ Moreover, he thought,  ¡ once you being a gesture, it ¡s fatal not to go through with it ¡ So his acute saying of quitting the job wasn ¡t his false pride and ego or a manifestation to show his sympathy for the girl (even to attract the girl ¡s attention) but a strong love of liberty, and a detestation of hypocrisy. How true it was ¡ That ¡s policy for you. Policy is what the kingpins what. What the other want is juvenile delinquency ¡ Yet, it was a difficult choice of a moment or even a lifetime so unknown and often difficult, Sammy indeed choose the exception challenge path as  ¡ I felt how hard the world was going to be to me hereafter. ¡ I feel that he stands above everyone else ¡s life, for he didn ¡t opt to the common route, the reliable life. The story shows me that truth and love are two of the most powerful things in the world; and when they both go together they cannot easily be withstood. Sammy is really the master of his ...

Monday, October 21, 2019

Mettre les pieds dans le plat - French Expression

Mettre les pieds dans le plat - French Expression Expression: Mettre les pieds dans le plat Pronunciation: [ meh treu lay pyay da(n) leu pla] Meaning: To mess up, to speak with excessive candor, to discuss something inappropriate Literal translation: To put ones feet in the dish Register: Informal Notes You cant help but notice the similarity between the French expression mettre les pieds dans le plat and the English to put ones foot in ones mouth, but they dont mean quite the same thing. The French expression means to bring up a delicate subject without any delicacy at all, or to discuss a topic that everyone else is avoiding. This is probably not embarrassing to the speaker, who just wants to talk about that subject (even if that means unintentionally embarrassing everyone else in the room). The English expression, however, definitely implies embarrassment on the part of the speaker, since it means that youve just committed a social blunder by saying just about anything you shouldnt have, possibly about something that is- was- a secret (such as the person youre talking to getting fired, or you knowing about someones extra-marital affair). This would probably be translated by something generic like faire une gaffe. Examples   Ã‚  Ã‚  Je parle trà ¨s franchement- je mets souvent les pieds dans le plat.   Ã‚  Ã‚  I speak very frankly- often too frankly.     Ã‚  Ã‚  Oh l l, tu as bien mis les pieds dans le plat, l  !   Ã‚  Ã‚  Oh dear, you messed up there!

Sunday, October 20, 2019

Dear Sir and Other Business Conventions

Dear Sir and Other Business Conventions Dear Sir and Other Business Conventions Dear Sir and Other Business Conventions By Maeve Maddox A reader asks: Is it just me, or does the Dear seem a little awkward when starting a business letter to someone whom you have never met or communicated [with]? If I have to call someone Mr. or something similar, is this person really dear to me? I had to laugh because I had a similar feeling the first time I had to type a letter signed Yours faithfully in England. Wow, I thought, what a devoted way to sign a business letter! At the time I was very young and literal-minded. (you can read more here about the business letter format). Dear Sir, Yours sincerely, Yours faithfully, and all such polite expressions are conventions, agreed-upon forms that serve a conventional purpose. Theyre not intended to be taken literally. Language is itself a convention. For example, the object that English speakers call a pencil is by French speakers called a crayon. For American English speakers a crayon is a stick of colored wax composition used for drawing and coloring. When I use a word, Humpty Dumpty said, in a rather scornful tone, it means just what I choose it to mean, neither more nor less. The question is, said Alice, whether you can make words mean so many different things. We can and do make the same words mean different things. Its all a matter of context. The dear in Dear Sir, does not mean the same as the dear that I use to address my grandchild. The one is a convention; the other is an endearment. The complete conversation between Alice and Humpty Dumpty in Through the Looking Glass may be read here. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Business Writing category, check our popular posts, or choose a related post below:20 Great Opening Lines to Inspire the Start of Your Story5 Lessons for Mixing Past and Present Tense5 Ways to Reduce Use of Prepositions

Saturday, October 19, 2019

Bose stadium sound system Essay Example | Topics and Well Written Essays - 250 words

Bose stadium sound system - Essay Example Bose stadium sound systems are designed to strengthen audio sounds with a centre field focus. The highest amount of sound is transmitted to the spectators seated at the farthest end of the stadium, there is less need for external source of sound since Bose systems can easily relay waves to the different corners of the stadium. An analysis of Bose systems requires that a measurable and quantifiable quality and details of the venue be first entered into the Bose modeler software. Therefore it is important to first of all find the model that best suits the type of stadium before installing it (BOSE UNITED STATES). Sound is the key aspect in a stadium that makes a game interesting, spectators want to hear what the commentator is saying to better experience the game, when the people cannot hear from the speakers they become frustrated and no longer enjoy the game. This is where Bose sound systems come in since it amplifies sound to the farthest corner, music and comments can be heard quickly enhancing the reaction of the

Friday, October 18, 2019

Practical proposal about ATM fraud Essay Example | Topics and Well Written Essays - 250 words

Practical proposal about ATM fraud - Essay Example Smart phones can be used to make withdrawals and payments in retail stores instead of credit cards. This will protect the PIN numbers and other personal information. According to Abagnale, the use of smart phones will not apply universally as this will require one to become an expert of some electronic gadget, a task that is not so easy. However, technology is just part of the inevitable change that happens as we become more civilized. The same way people got training on computers, is the same way they can get training on use of these efficient gadgets (Abagnale, 108). The investment is actually worthwhile for varied reasons. First, it is impossible to record the PIN as done on an ATM. Secondly; the same smart phone can be used to keep track of one’s expenses as it records when and where the transaction was made. This information can also be accessed through emails. Also, some of these gadgets are so advanced that they also utilize the use of genes and fingerprints. A good example in this case is the use of gene coding in most bank vaults which has proved to be safer over the

Drug and crime Essay Example | Topics and Well Written Essays - 1500 words

Drug and crime - Essay Example These individuals consider as normal vices what their counterparts in the normal society consider as abomination. After locating them and doing the study, it is impossible for a researcher to know if the data from the sample is representative of all the parameters of the population. This is because the official numbers of the people in the drug related issues is unknown (Tanneeru 2011). There are various methods of collecting data related to drug manufacture, distribution, usage and abuse activity as explained by Coomber (1997). First, the researcher may collect data from official records e.g. police reports and treatment records. However, these data sources have their limitations, mostly due to the tendency of the hidden population to keep matters to themselves. For instance, they do not report criminal activity or conflicts among members and, therefore, data collected from police reports do not reflect the real situation, only accounting for few of the cases of drug use and drug related crimes. One outstanding characteristic of the data from police and that collected from treatment records is that the information only covers drug use cases that cause disruption of normal social function and not mild or non-chronic drug users. In addition, collecting treatment data may compromise the profession and ethical codes that ensure patient-doctor confidentiality. Another source of data on drug use is surveys and questionnaires, where researchers find the sample of interest and administer questionnaires among other primary data collection measures. This method has the advantage of the possibility of many people participating in the study, though it is also tedious and time-consuming. Since most drug users keep a low profile and hardly participate in public life, it is difficult to identify and impossible to know the total number of drug users. Therefore, data collected this way may not be representative of the drug-using population since researchers

Computer crimes and fraud Essay Example | Topics and Well Written Essays - 1000 words

Computer crimes and fraud - Essay Example One example of an ethical dilemma is seen when employees conduct their own errands, hobbies, and businesses during working hours. In many occasion, employees can be found accessing social networking sites, checking personal emails, and shopping on the organization’s computers. This may seem harmless when employees use the organization’s facilities for personal benefit after they have finished their work for the day. However, if these habits continue, the trend will be spread to more employees who will assume that it is okay to start doing this. This will deny the owner or the owners of the organization their right to make profits. When employees are being employed, they agree to work for the benefit of the organization. They are expected to use the time allocated to them to work on the tasks given to them to the best of their ability and in the timeliest manner. The employee is given the responsibility to act in the best interest of the company. When employees are doing their personal things using the resources of the organization, they are making unethical decisions as opposed to what is expected from them. This can negatively affect the performance of the organization. It is crucial for employees to act ethically because integrity forms a big part in building and maintaining relationships with employers. This also helps an individual to create a personal brand. It is also evident that investors like dealing with organizations that are seen to be ethical.

Thursday, October 17, 2019

The Port Hedland case study Essay Example | Topics and Well Written Essays - 2500 words

The Port Hedland case study - Essay Example Finally the author justifies her choice of strategies, the limitations and methods that can be used to overcome the limitations. Community planning and development is an essential component of all developed and developing economies. There are many different reasons for community planning and development to take center stage in any local government initiative. The reason for this is because unless communities are planned and developed effectively the individuals living and working in those communities would suffer from various different hardships. These hardships would depend on the scale and the inadequacy of the different amenities that have been provided by the communities. The more amenities that are provided by a community the more that community will thrive and therefore effective community planning and development is an essential. A community can be loosely defined as a group of individuals living in a common marked off location. These individuals will form separate family and living units, but still they will be interdependent on each other and may even contribute to one another's well being through social networks and through products and services that the manufacture, sell and provide. For instance any small village or part of a village can be considered as a community unit. As it will consist of individuals of different age groups and from different parts of society fulfilling different roles whether and contributing in one way or another to the group (Bhattacharyya, 2004). Amongst those who contribute will also be those who do not and can be detrimental to the community unit. Reasons for community development and planning to be necessary As stated above the more amenities a community has the better it is for the living standards of those living in the community. For instance if the community has adequate public health facilities and educational facilities for children, that would help the community to be healthy and productive, which benefits the entire community through its economic development. When there is adequate educational facilities for the children that ensure that the future of the community, which is in the hands of the future generation will be very secure. From the stand point of a nation, better planned the communities throughout the nation are - the more healthier, more educated and the more productive the citizens would be in the long term, which in turn will benefit the entire nation. The Issues of inadequate community development and planning Since the report has looked at the necessity for appropriate community development and planning, in this section of the report the author will focus her attention on the issues that can arise from inadequate community development and planning. Social inequality amongst the individuals, Economic inequalities and Political inequalities are some of the disadvantages that have to be faced by a nation that does not pay adequate attention to the proper development and planning of its communities (Kellogg, 2002) Therefore in this section the author will focus on those three areas and the type of inequalities that can arise from the inadequate amenities being provided to the communities. Social Inequality When amenities like adequate public h

Helping out Older People who do not have Children Essay

Helping out Older People who do not have Children - Essay Example These old people need a lot of support and giving them the support makes them happy and they get to enjoy life to the full just like they used to enjoy when they were young. Doing this work brings a lot of joy and memories into their world, and satisfaction and happiness in mine. Â  When people grow old the need for long-term care certainly grows. The longer they (old people) live, the more likely they fall prey to chronic diseases. This works gives me the opportunity and honor to help the needy in one way or another and ensuring that they do not lack anything in their lives that I can afford to give especially company. Â  Watching old people struggle to make ends meet hence making out a living in the cruel world made me volunteer into helping them. Some of these old people had children who died and others had no chance of having any more of them. Helping the old people feels great as they are a bunch of blessings to many. Being an old person who does not have children brings a lot of happiness to them as they take you to be as their own child. They need constant care because many people have neglected them and do not want to be associated with them. They are either left on their own or thrown away in the streets. This leaves them in a bad situation and many of them if they fail to get the care they die due to stress or chronic diseases. Â  The benefits of helping out the old people are many. The benefits are to the caregiver and the person who is being taken care of.

Wednesday, October 16, 2019

The Port Hedland case study Essay Example | Topics and Well Written Essays - 2500 words

The Port Hedland case study - Essay Example Finally the author justifies her choice of strategies, the limitations and methods that can be used to overcome the limitations. Community planning and development is an essential component of all developed and developing economies. There are many different reasons for community planning and development to take center stage in any local government initiative. The reason for this is because unless communities are planned and developed effectively the individuals living and working in those communities would suffer from various different hardships. These hardships would depend on the scale and the inadequacy of the different amenities that have been provided by the communities. The more amenities that are provided by a community the more that community will thrive and therefore effective community planning and development is an essential. A community can be loosely defined as a group of individuals living in a common marked off location. These individuals will form separate family and living units, but still they will be interdependent on each other and may even contribute to one another's well being through social networks and through products and services that the manufacture, sell and provide. For instance any small village or part of a village can be considered as a community unit. As it will consist of individuals of different age groups and from different parts of society fulfilling different roles whether and contributing in one way or another to the group (Bhattacharyya, 2004). Amongst those who contribute will also be those who do not and can be detrimental to the community unit. Reasons for community development and planning to be necessary As stated above the more amenities a community has the better it is for the living standards of those living in the community. For instance if the community has adequate public health facilities and educational facilities for children, that would help the community to be healthy and productive, which benefits the entire community through its economic development. When there is adequate educational facilities for the children that ensure that the future of the community, which is in the hands of the future generation will be very secure. From the stand point of a nation, better planned the communities throughout the nation are - the more healthier, more educated and the more productive the citizens would be in the long term, which in turn will benefit the entire nation. The Issues of inadequate community development and planning Since the report has looked at the necessity for appropriate community development and planning, in this section of the report the author will focus her attention on the issues that can arise from inadequate community development and planning. Social inequality amongst the individuals, Economic inequalities and Political inequalities are some of the disadvantages that have to be faced by a nation that does not pay adequate attention to the proper development and planning of its communities (Kellogg, 2002) Therefore in this section the author will focus on those three areas and the type of inequalities that can arise from the inadequate amenities being provided to the communities. Social Inequality When amenities like adequate public h

Tuesday, October 15, 2019

ENVS Essay Example | Topics and Well Written Essays - 500 words - 3

ENVS - Essay Example Hayes, astrazine cause development of ovaries in male frogs. One advantage of animal testing is that it helps researchers to discover treatments for both animals and humans. One of the disadvantages of animal testing is that it can be misleading since animals may react to drugs in different ways as humans. In addition, animal testing leads to mistreatment of animals. Testing on animals is justified because it has helped researchers to discover many effective treatments. Additionally, animals should be used because their lives have less value compared to humans. Testing upon animals can give accurate results because the bodies of most animals used for tests function like humans. Scientists have proved that lab animals and humans do not have big difference. In addition, most of the drugs used today were discovered through animals testing. For instance, antibiotics and HIV drugs used by humans today gave positive results when tested on animals. Other methods of testing are less effective compared to animal testing. In addition, surgery and organ transplant techniques used on humans today were acquired through animals testing. Tyrone says that rats are the most relevant animals used to simulate humans in laboratories. Humans cannot be used in labs tests because it will be unethical to expose to humans chemicals during lab tests. According to him, the use of rats produces accurate results because rats have regular reproduction, genetic purity and many resemblances to human biology (Hayes). If I were a farmer, would not use atrazine to increase my crop yield. This is because the herbicide will only increase yields for a short period since it causes land degradation. Additionally, it will negatively affect my health. Research outcomes show that it causes obesity and cell mutation. Additional ways of increasing crop yield apart from using chemicals encompass organic farming. In organic farming, one uses decomposed animal products or plants to fertilize

Monday, October 14, 2019

Two Hole Paper Punch Engineering Essay

Two Hole Paper Punch Engineering Essay The product I have chosen to manufacture is the two-hole paper punch. This product is one which is widely used in homes, schools and businesses all over the world for the purpose of punching holes in paper to allow for attaching multiple sheets together in an organised fashion. Such examples of devices used in conjunction with the two-hole punch include the ring binder folder and treasury tags. Component Parts On close inspection of existing two-hole punch products similar to the one in Fig.1 it can be observed that there exists six fundamental component parts to the piece. Some of these components are used in matching pairs and for this reason they can be considered as one single part in regards to the manufacturing of the product. Therefore the component parts can be categorised in four groups as follows: Base Plate ( To which everything is attached) Lever Handel ( The whole mechanism works from the behaviour of this part) Punchers ( Creates the holes in the paper) Springs ( Resets the mechanism for next use) Possible Materials There are countless materials which could be used to make the components of this product but the question is which ones are cost effective and also offer good quality. At this point I am considering using Perspex for the lever handle and Aluminium for the base plate. Stronger materials will be needed for the puncher heads to ensure a lasting sharpness over repeated use. Stainless steel could be a possibility in this case. And the springs will need to be strong also for the same reasons of repeated use so I would consider using some other variation of steel here too. Perspex The material we now know as Perspex began life, when the first acrylic acid was produced, in 1843. Methacrylic acid was formulated in 1865 and the reaction between methacrylic acid and methanolresults in the coumpound called metyl methacylate. In 1877 Two German chemists discovered the polymerization process that turns methyl methacrylate into polymethyl methacrylate. In 1933 another German chemist named Otto Rohmpatented and registered the name PLEXIGLAS. Then in 1936 the first commercially viable production of acrylic glass began. During World War II acrylic glass was used for submarine periscopes, and windshields, canopies, and gun turrets for airplanes. From a chemical point of view it is the polymer of methyl methacrylate that is sold under the trade names of Plexiglas or Perspex. Perspex is frequently used as a light or shatter-resistant alternative to glass. It is often favoured because of its moderate properties, easy handling and processing, and low cost. However when loaded it behaves in a brittlemanner and this is especially the case when subjected to an impact force. Also when compared to glass it is more prone to scratching. Aluminium Aluminium is a silvery-white andductilemember of theboron groupofmetals. It has the symbolAl and itsatomic numberis 13. Also it is not soluble in water. Aluminium is themost abundant metalin theEarthscrust, and the third most abundant element therein, next to oxygenand silicon. It makes up approximately 8% of the Earths solid surface by weight. Aluminium is too reactive chemically to occur as a free metal naturally. Instead, it is found combined in over 270diverseminerals.The chief resource of aluminium isbauxiteore. Aluminium is remarkable for its ability to resistcorrosiondue to the phenomenon ofpassivationand the metals low density. Aluminium is a soft, durable, lightweight,malleablemetalwith visual appearance ranging from silvery to dull grey which depends on the surface texture. Aluminium is non-magnetic and non-sparking. It is also insoluble in alcohol, though in certain forms it can be soluble in water. Theyield strengthof pure aluminium is 7-11MPa, while aluminium alloyshave yield strengths ranging from 200 MPa to 600 MPa.Aluminium has about one-third the densityandstiffnessofsteel. It isductile, and easilymachined,cast,drawnandextruded. Corrosionresistance can be excellent due to a thin surface layer ofaluminium oxidethat forms when the metal is exposed to air, effectively preventing furtheroxidation. The strongest aluminium alloys are less corrosion resistant due togalvanicreactions with alloyedcopper.This corrosion resistance is also often greatly reduced when many aqueous salts are present, particularly in the presence of dissimilar metals. Aluminium atoms are arranged in aface-centred cubic(fcc) structure. Stainless Steel Inmetallurgystainless steel, also acknowledged asinox steelorinoxfrom French inoxidable, is defined as asteelalloywith a minimum of 10.5or 11% chromiumcontent by mass.Stainless steel does not stain, corrode, or rust as easily as regular steel (itstains less, but it is not stain-proof).It is also calledcorrosion-resistant steelorCRESwhen the alloy type and grade are not detailed. There are different grades and surface finishes of stainless steel to suit the environment to which the material will be exposed to in its lifetime. Stainless steel is used where the properties of steel, and resistance to corrosion are both required. Stainless steel differs from carbon steel by the amount of chromium present. Carbon steel rusts when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion and blocks corrosion from spreading into the metals internal structure. Carbon Steel Carbon steel, also calledplain carbon steel, issteelwhere the mainalloyingconstituent iscarbon. Carbon steel is defined as steel that has no minimum carbon content specified. The term carbon steel may also be used in reference to steel which is notstainless steel; in this use carbon steel may include alloy steels. Steel with a low carbon content has properties similar to iron. As the carbon content rises, the metal becomes harder and stronger but lessductileand more difficult toweld. In general, higher carbon content lowers the melting point and its temperature resistance. Carbon content influences the yield strength of steel because carbon atoms fit into theinterstitialcrystallinelatticesites of thebody-centered cubic(BCC) arrangement of the iron atoms. The interstitial carbon reduces the mobility ofdislocations, which in turn has a hardening effect on the iron. To get dislocations to move, a high enough stress level must be applied in order for the dislocations to break away. This is because the interstitial carbon atoms cause some of the iron BCC lattice cells to distort. Mild and low carbon steel Mild steel is the most common form of steel because its price is relatively low while it provides material properties that are acceptable for many applications. Low carbon steel contains approximately 0.05-0.15% carbonand mild steel contains 0.16-0.29%carbon, therefore it is neither brittle norductile. Mild steel has a relatively low tensile strength, but it is cheap and malleable; surface hardness can be increased throughcarburizing. It is often used when large quantities of steel are needed, for example asstructural steel. The density of mild steel is approximately 7.85g/cm3(0.284lb/in3)and theYoungs modulusis 210,000MPa (30,000,000psi). Background Research Production Process The Objective of this section is to define the materials and examine the possible production processes for each of my four component parts. There is always more than one way to carry out a job and yet still obtain a successful result. However some methods are more cost effective than others. I wish to present multiple solutions to manufacturing each of my parts and from there choose the best balance of quality, time and economy. Base Plate Aluminium Casting The first production process option to be examined is the idea of the multiple-use-mold casting process In the permanent-mold casting process a re usable mold is machined from grey cast-iron, steel, graphite or other such material. The mold is first pre-heated, and molten metal is poured in under the action of gravity alone. After solidification, the mold is opened and, the product is removed. The mold is then reclosed and another casting is poured. Aluminium is frequently cast by this process. There are numerous advantages for this process. The mold is reusable. A good surface finish is obtained provided the mold is in good condition. Dimensional accuracy can usually be held within 0.13-.25 mm. By selectively heating or cooling various parts of the mold, or by varing the thickness of the mold wall, directional solidification can be promoted so as to produce sound, defect-free castings with the desired mechanical properties. However there are some drawbacks to this process too. The mold life depends upon a number of factors: The allow being cast. The higher the melting point, the shorter the mold life. The mold material. Grey cast iron has about the best resistance to thermal fatigue and also machines easily. Thus it is used most frequently for permanent molds. The pouring temperature. Higher pouring temperatures reduce mold life, increase shrinkage problems, and induce longer cycle times. Mold temperature. If the temperature is too low, mis runs are produced, and high temperature differences form in the mold. If the temperature is too high, excessive cycle times result, and mold erosion is aggravated. Mold complexity is often restricted because the rigid cavity has no collapsibility to compensate for the shrinkage of the casting. As a best alternative, it is common practice to open the mold and remove the casting immediately after solidification, thereby preventing any tearing that may occur on subsequent cooling-down. Permanent molds are usually headed at the beginning of a run and are then maintained at a fairly uniform temperature as a means of controlling the cooling rate of the metal being cast. Since the mold rises in temperature as a casting is poured and sufficient time is permitted for solidification, it may be necessary to provide a cool-down delay before another casting is poured. Refractory washes are often applied to the mold walls to prevent the casting from sticking and to prolong the mold life. Mold costs are generally high so that high-volume production is necessary to justify the expense. Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece fed into a rotating cutter in a direction perpendicular to the axis of the cutter. Sometimes the workpiece remains stationary, and the cutter is fed to the work. In nearly all cases a multiple-tooth cutter is used so that the material removal rate is high. Often the the desired surface is obtained in a single pass of the cutter or work and, because very good surface finish can be obtained, milling is particularly well suited to and widely used for mass-production work. Several types of milling machines are used ranging from relatively simple and versatile machines that are used for general-purpose machining in job shops and tool-and-die work to highly specialized machines for mass production. Unquestionably, more flat surfaces are produced by milling than by any other machining process. The cutting tool used in milling is known as the milling cutter. Equally spaced peripheral teeth will intermittently engage and machine the workpiece. This is called interrupted cutting. Milling operations can be classified into two broad categories called peripheral milling and face milling. Each has many variations. In peripheral milling the surface is generated by teeth on the periphery of the cutter body. The surface is parallel to the axis of rotation of the cutter. Both flat and formed surfaces can be produced by this method, the cross section of the resulting surface corresponding to the axial contour of the cutter. This method is often called slab milling and is usually performed on horizontal spindle machines. In slab milling, the tool rotates at a certain rpm while work feeds past the tool. Water Jet Cutting Awater jet cutter or just waterjetis a machine capable of cutting intometaland other materials by means of a jet ofwaterat high velocity and pressure. The process is, in theory, the same aswater erosionfound in nature however it is greatly accelerated and concentrated. It is frequently used during manufacture of parts for machinery and other such devices. This is the preferred process when the materials involved are sensitive to the extreme temperatures that friction causes in other methods. Water jet cutting has found applications in a wide range of industries. Examples of these are mining and aerospacewhere it is used for operations such as shaping, cutting and carving. One important advantage of the water jet cutter its function to process material without interfering with the materials inherent structure as there is no heat-affected zone/ Haz. Minimizing the effects of heat allows metals to be processed without altering internal charachteristics. Water jet cutters also have the ability to produce rather detailed cuts in a material. When specialized computer software and 3-D machining tools are used, complex 3-D shapes can be created. The nozzle can be changed and adjusted to give the required cutting width. Typical abrasive cuts are made with a nozzle in the range of 1.016 to 1.27mm, but can be as narrow as 0.508mm. Non-abrasive cuts are normally 0.178 to 0.33mm, but can be as small as 0.076mm, which is roughly the width of a human hair. Small cutters ike these can make very small detail possible in a broad range of tasks. Waterjets are capable of accuracy of 0.13 mm, and repeatability to within a tolerance of 0.03 mm. Water jet cutting is a green technology.Nno hazardous waste is produced which reduces waste costs. Large pieces of recyclable scrap material are cut off using this method which would have been otherwise lost using traditional cutting methods. Waste water is usually clean enough to filter and disguard of down a normal drain. The abrasive is non-toxic and can be recycled for many uses. Water jets also avoid airborne fumes, and contaminates from cutting materials such as asbestos and fiberglass. This really benefits the work environment and greatly reduces any health problems arising from operator exposure. Lever Handel-Perspex Injection moulding Injection moulding is used to produce more thermoplastic products than any other process. Granules of raw material are fed from a hopper by gravity into a pressure chamber ahead of a plunger. As the plunger advances, the plastic is forced through a heated chamber, where it is preheated. From the preheating segment, it is forced through the torpedo section, where it is melted and super-heated to 200-300Â °C. It then leaves this section through a nozzle which seats up against the mold and allows the molten plastic to enter the closed-die cavities through suitable gates and runners. The die remains cool, so the plastic solidifies almost as soon as the mold is filled. To ensure proper filling of the cavity, the material must be forced into the mold rapidly under considerable pressure, typically 35-140 MPa. Premature solidification would cause defective products. While the mold is being opened, the part ejected, and the mold reclosed, the material for the next part is being heated in the torpedo. The complete molding process takes typically between 1 and 30 seconds and is very similar to the die-casting of molten metals. Because thermosetting plastics must be held at an elevated temperature and pressure for sufficient time to permit curing, the injection molding process must be modified for this type of polymer. In the jet molding process the polymer is preheated in the feed chamber to about 95Â °C and then is further heated to the temperature of polymerization as it passes through the nozzle. Additional time in the heated mold completes the curing process. Care must be exercised to prevent the material in the nozzle from cooling during this time and clogging the flow. Water cooling is introduced to the nozzle area as soon as the cavity is nearly filled. The water cools the material in this region and retards the hardening reaction. Because of the long cycle time, little injection molding of thermo-sets is performed. The properties can often compete with die-cast metals, provided the lower rigidity of the polymer is not objectionable. Milling The milling process is the same as before when it was discussed in relation to Aluminium. The only difference now is the material, which is Perspex. Laser cutting Laser-aided cutting has brought about a revolution in the manufacturing industries. These high-powered optical beams are used to cut through a variety of materials such as metal, wood, glass and plastic. The laser is directed at the required surface and moved around to cut the material in the desired shape. Laser cutting gives a finer finish to the end product as compared to conventional cutting methods. A typical laser beam is about 1/5th of a millimeter in width and has an intensity of 1000 to 2000 watts. Most laser cutting machines are integrated into a CAD/CAM system that helps the user design the end product on a computer before implementing it on the work piece. Laser cutting devices are proving beneficial in a wide array of industries. The plastic industry is no exception. These optic powered devices are used to cut precise shapes into plastic or acrylic sheets. The lasers can be used to cut plastics of varying thickness by simply altering the intensity of the beam. Lasers are not only used to cut through plastics but also help engrave on various surfaces. Laser plastic cutting machines bring precision and accuracy to the entire process. Since most machines are fully automated, they can perform complex cutting operations at high-speeds. The laser plastic cutting machines can also be used to cut polymers, polycarbonates and other synthetic materials such as polyesters and rubbers. The laser cutting method uses a non-contact approach when cutting the material. Due to this, the wear and tear associated with conventional methods is absent, preventing the product from any damage and deformation. The laser process also delivers a finish quality unmatched by any other process. When using laser plastic cutting machines, care should be taken to avoid the use of flammable plastics such as PVCs. These materials cannot cope with the heat generated by the laser and get damaged easily. Punches Stainless Steel Extrusion The process begins by heating the stock material. It is then loaded into the container in the press. A dummy block is placed behind it where the ram then presses on the material to push it out of the die. Afterward the extrusion is stretched in order to straighten it. If better properties are required then it may beheat treatedorcold worked. The extrusion ratio is defined as the starting cross-sectional area divided by the cross-sectional area of the final extrusion. One of the main advantages of the extrusion process is that this ratio can be very large while still producing quality parts. Hot extrusion is done at an elevated temperature to keep the material fromwork hardeningand to make it easier to push the material through the die. Most hot extrusions are done on horizontal hydraulic presses that range from 250 to 12,000 tons. Pressures range from 30 to 700MPa (4,400 to 102,000psi), therefore lubrication is required, which can be oil or graphite for lower temperature extrusions, or glass powder for higher temperature extrusions. The biggest disadvantage of this process is its cost for machinery and its upkeep. There are many different variations of extrusion equipment. They vary by four major characteristics: Movement of the extrusion with relation to the ram. If the die is held stationary and the ram moves towards it then its called direct extrusion. If the ram is held stationary and the die moves towards the ram its called indirect extrusion. The position of the press, either vertical or horizontal. The type of drive, either hydraulic or mechanical. The type of load applied, either conventional (variable) orhydrostatic. A single or twin screw auger, powered by an electric motor, or a ram, driven by hydraulic pressure (often used for steel and titanium alloys), oil pressure (for aluminum), or in other specialized processes such as rollers inside a perforated drum for the production of many simultaneous streams of material. Typical extrusion presses cost more than $100,000, whereas dies can cost up to $2000. Springs Steel The following description focuses on the manufacture of steel-alloy, coiled springs. Winding Cold winding Wire up to 0.75 in (18 mm) in diameter can be coiled at room temperature using one of two basic techniques. One consists of winding the wire around a shaft called an arbor or mandrel. This may be done on a dedicated spring-winding machine, a lathe, an electric hand drill with the mandrel secured in the chuck, or a winding machine operated by hand cranking. A guiding mechanism, such as the lead screw on a lathe, must be used to align the wire into the desired pitch (distance between successive coils) as it wraps around the mandrel. Alternatively, the wire may be coiled without a mandrel. This is generally done with a central navigation computer (CNC) machine. Examples of different types of springs. Examples of different types of springs. The wire is pushed forward over a support block toward a grooved head that deflects the wire, forcing it to bend. The head and support block can be moved relative to each other in as many as five directions to control the diameter and pitch of the spring that is being formed. For extension or torsion springs, the ends are bent into the desired loops, hooks, or straight sections after the coiling operation is completed. Hot winding Thicker wire or bar stock can be coiled into springs if the metal is heated to make it flexible. Standard industrial coiling machines can handle steel bar up to 3 in (75 mm) in diameter, and custom springs have reportedly been made from bars as much as 6 in (150 mm) thick. The steel is coiled around a mandrel while red hot. Then it is immediately removed from the coiling machine and plunged into oil to cool it quickly and harden it. At this stage, the steel is too brittle to function as a spring, and it must subsequently be tempered. Assembly Procedure Methods Quality Control Qulaity control is defined as the maintenance of standards of quality of manufactured goods. With this in mind there are a few methods i could employ in the upkeep of quality in the product choosen.

Sunday, October 13, 2019

The Shame of Cigarette Smoking in the Healthcare System :: Journalism Journalistic Essays Smoke

Smokers in scrubs: The shame of cigarette smoking in the healthcare system On a recent Thursday morning, while some hospital employees smoked cigarettes in Brigham and Women’s safe haven known as the "butt-hut," others crowded the lobby on Frances Street in Boston to check out the American Cancer Society's â€Å"The Great American Smoke-Out† event. Two women sat behind a folding table handing out informational pamphlets on smoking hazards and ways to kick the fatal habit. Several of the women and men who approached the table for information or signed up to get their lung capacity tested were wearing scrubs, a sign that cigarette smoking is still prevalent among health care employees. â€Å"Hospitals, including Dana Farber, are starting to now reimburse employees who enroll in a quit-smoking program. In some cases, they get back almost $ 500 for counseling, patches, and nicotine gum,† said Jennifer Kelly, who runs the smoking cessation program at Brigham and Women’s. The smoking cessation program is offered to both employees and the public, and provides individual and group counseling, which meets one day a week for eight weeks. Kelly explained that each hour- long session costs $10, however the fee is waived for those with free healthcare benefits or Medicare and all participants of the program receive discounts on nicotine patches and chewing gum. With several Boston area programs designed to rid the habit of the 20% of Massachusetts residence, who smoke and with hospitals practically paying their employees to quit smoking than why are 47 million adults in the U.S. still smoking cigarettes? Nicotine is one of the most addictive substances today; studies have shown that nicotine is as addictive to people as heroin, cocaine and alcohol. According to a study conducted by the American Cancer Society, in the U.S today, nicotine is the most common form of drug addiction among adults, high school students and middle-school students. While studies preformed by the Center for Disease Control and Prevention have shown that cigarette smoking has declined 40% among adults ages 18 and over, between the years of 1965 and 1999 still today, nearly 26% of men and 22% of women smoke cigarettes. Dr. Laura Fredenburgh, a soft spoken and attractive woman in a white coat with her name and title embroidered on the pocket, sat at a long table on Thursday morning. She carefully explained to people the results of their free lung capacity tests that were given during the â€Å"Smoke-Out.

Saturday, October 12, 2019

Global Warming and Greenhouse Gas Emissions :: Global Warming Climate Change

Global Warming and Greenhouse Gas Emissions Overall, emissions of CO2 increased by 0.3% to 6.8 tons per person in the United States. Emissions of greenhouse gases other than carbon dioxide, which account for 17% of total greenhouse gas emissions, declined by 0.6%. Emissions from the industrial sector declined 1.3% even though the U.S. economy grew 3.9% in 1998. However, CO2 emissions from transportation grew by 2.4% while CO2 emissions of regulated utilities expanded by 3.2% as a result of a hotter than normal summer. Overall, 1999 U.S. greenhouse gas emissions were about 10.7 percent higher than 1990 emissions, which are estimated at 1,655 million metric tons carbon equivalent. The 1.1-percent average annual growth in U.S. greenhouse gas emissions from 1990 to 1999 compares with average growth rates of 1.0 percent for the U.S. population, 1.5 percent for energy consumption, 2.2 percent for electric power generation, and 3.1 percent for real GDP Table ES2. U.S. Emissions of Greenhouse Gases, Based on Global Warming Potential, 1990-1999 (Million Metric Tons Carbon Equivalent) Gas 1990 1991 1992 1993 1994 1995 1996 1997 1998 P1999 Carbon Dioxide 1,351 1,338 1,365 1,397 1,422 1,435 1,484 1,505 1,507 1,527 Methane 182 183 183 178 179 179 173 172 168 165 Nitrous Oxide 99 101 103 103 111 106 105 104 103 103 HFCs, PFCs, and SF6 24 22 24 24 25 29 33 35 40 38 Total 1,655 1,644 1,675 1,702 1,737 1,748 1,796 1,816 1,818 1,833 P = preliminary data.Note: Data in this table are revised from the data contained in the previous EIA report, Emissions of Greenhouse Gases in the United States 1998, DOE/EIA-0573(98) (Washington, DC, October 1999).Sources: Emissions: Estimates presented in this report. Global Warming Potentials: Intergovernmental Panel on Climate Change, Climate Change 1995: The Science of Climate Change (Cambridge, UK: Cambridge University Press, 1996). Energy End-Use Sector Sources of U.S. Carbon Dioxide Emissions, 1990-1999 Sector Million Metric Tons Carbon Equivalent PercentChange 1990 1999 1990-1999 1998-1999 Transportation 431.8 496.1 14.9% 2.9% Industrial 454.8 481.2 5.8% 0.2% Commercial 207.7 243.5 17.2% -0.4% Residential 254.2 290.1 14.1% 0.4% Note: Electric utility emissions are distributed across sectors. Total carbon dioxide emissions from the residential sector increased by 0.4 percent in 1999 (Table 6). Year-to-year, residential sector emissions are heavily influenced by weather. For example, in 1996, a relatively cold year, carbon dioxide emissions from the residential sector grew by 5.9 percent over 1995. In 1997, they declined by 0.

Friday, October 11, 2019

The History of the National Transport Safety Board

The National Transport Safety Board in the United States of America was established on the 1st of April 1967, basically relying on the Department of Transportation, for its funding and the administration maintenance. In 1974, the Safety Board Act (in P.L.93-633) was passed by the Congress, which thereafter, separated the board from the department of transportation which allowed the safety agency to carryout the unbiased investigations and also to make recommendations about the safety regulation sine then the NTSB has received a momentous respect from the Congress for its hard work in discovering the needed transportation safety enhancement and maintaining the civic confidence in transportation safety. On 1st October 2002 the funding authorization for the National Transport Safety Board expired but in the second session of the 107th Congress, bills that is the CRS-43H.R. 1527/S. 579 grants for authorization of the funds that are necessary for the expenses of the board. Senator John McCain introduced the reauthorization of the safety board which was therefore prepared and reported positively without adjustments by the Senate Committee on Commerce, Science and Transportation. We see that on 13th March 2003. Representative Don Young established a bill for reauthorization of the board that was to be done on 1st April 2003. Also the House Committee covering Transport and Infrastructure reported a bill on May 1, 2003 the two bills, were to authorize the boards’ appropriations from the year 2003 to the year 2006 in which the same funding was to be provided. [1] Since its launch, the board has been given the responsibility of carrying out investigations on aviation and surface transportation accidents. Due to its high number of investigation recorded, the board is ranked as the worlds leading accident investigation agency. These transportation modes include the highway, marine, pipeline and railroad, therefore, it core objective is presenting safety recommendations that are meant to prevent future transportation accidents, and therefore it comes up with capable causes of the accidents. These investigations are carried out by the boards regional and field officers though they are not the basic sources of information to the board. The board has headquarter offices for all modes of transportation in which various information is requested from. The headquarter offices are situated at 490 L'Enfant Plaza, SW Washington, DC 20594 and they can be contacted by telephone (202) 314-6000 while its conference center is located at 429 L'Enfant Plaza, SW Washington, DC   20594 the location of the offices vary, depending on the mode of transport that the board deals with . The board is also dependable for maintaining the governments records on transportation issues, these records are normally accrued from special studies on transportation protection that are conducted by the board,   these studies basiaclly come up with factual and safety recommendations that are of a nationalized importance. Under this, the board provides investigators who always serve as qualified legislative body which is specified in the international agreements for aviation accidents overseas that usually involve the United States registered aircrafts. The National Transport Safety Board does not carry out regulations over the transportation apparatus, operation and the transportation personnel. The boards’ success in the formation of the transportation safety comes as a result of, its character for fairness and care. The National Transport Safety Board has five Board Members, who are normally chosen by the President and confirmed by the Senate to serve for a period of five years. Therefore a member is nominated by the President as Chairman and another as Vice Chairman for a period of two years These Chairmanship requires a separate Senate verification. In a situation where the chairman is not designated, then the vice chairman acts in place of the chairman. [2] Since the board has no power to regulate the transportation laws in the country it only causes change in the safety implementation of the transportation systems in the USA, therefore, it submits safety proposals to managers, workers, and the users of transportation systems. The safety measures include: improvement of child protection in automobile industry, reduction of fatigue of people from transportation operations, creation of event recorders that includes; video systems, commercial highway vehicle recorders, and an improved flight data recorder. Averting runway incursions at airports; justifying the risks of structural icing on aircraft; and the elimination of the explosive fuel in fuel tanks from the aircrafts to prevent explosions. while on the rail roads, the board comes up with a suggestion of avoiding collision systems, it also improves the safety standards of trucks and buses on the roads, this may require the use of seat belts, it also implements the promotion of highway safety through licensing and also ensuring that the driving laws are adhered to by the members of the country, and in marine transportation, the board enhances the recreational boating safety; and the post-accident drug and alcohol testing. Reports say that, these safety recommendations across all modes of transportation for over 35 years, through which about 82% of the recommendations has led to the implementation of acceptable safety improvements in the United States. The board normally works in collaboration with the department of transport agencies during the drafting of these measures so as to ensure that they are issued earlier and also in a satisfactory manner. The national transport board is given the authority to sign contracts for facilities, technical services, and training in accident investigative theories and practices. Like in a case where the board was given a one year contract for a training site to the George Washington University, and in the year two 2003 it established the National Transport Safety Board(NTSB) Academy on London County Campus of the George Washington University in Ashburn, Virginia. It is also allowed to engage in agreements and other dealings that are important in accomplishing its mission without undergoing the normal procedures of contracts, though the board has been criticized over its financial management it has been struggling to create a balance between the issuing of responsibilities to its investigators to complete their duties on time and efficiently and also providing a better financial management system that is effective in curtailing the fraudulent risks and wastages of resources. [3] Despite the alleged financial mismanagement, the board had to establish a strategic plan that is meant to last for 4 years, the plan was established in the year 2006 and is expected to accomplished its objective in the year 2010, this plan is meant to guide the Agency’s work, by enabling the planning, budgeting and accounting for the work performed by the board. This strategy is to cover various issues, including the accident investigation, support and the boards’ employee’s development and resource management. The current technological complex in the transportation system has made it hard for the agency to meet the challenge of accidents, thus making the agency to enter into a resource declination period whereby, planning is seen to be the most important factor in the utilization of the declining resources. For this reasons, the aircrafts, vehicles, trains, pipelines and marine vessels have safety features integrated in them. Therefore the assignment of the National Transport Safety Board is to, recognize and converse the lessons learned from investigation of transportation accidents. this investigation is normally watchful, experienced and self-regulating in order to prevent the loss of possessions, individual injuries, loss of life and also the environmental harm. Apart from safety measures, the board also carries out the coordination of tragedy backing for, victims and families affected by the transportation accidents; it also arbitrates for the airman and mariner petition, this services are used to maintain the reputation that the transportation system of America   as the safest in the world. [4] Therefore the national board of safety have set plans to have a careful use of the resources by maintaining a motivated, experienced, well trained, equipped and supported workforce which will enable it accomplish its mission this motivation is to be done through   intellectual selection of attempt and masterful implementation of objective; this goes hand in hand with the contribution of the private and public sector partners, who are always cooperative and supportive, the communication of these   recommendations for change in the directive and functions of the services of transportation is also considered. The goals set by the transportation safety board in conjunction with its mission include: Accident investigation under this the board has been maintaining its reaction competence of the accidents and has also increased the examination of occurrence and other negative issues that predicted to be of consequences in the improvement of public transportation protection. The boards’ approaches to accident investigation involve the enhancing of the organizational capacities and investment of the resources to enable the board to recognize and analyze the incidents which will further identify the origin of the transportation accidents. The second goal of the board is the support and Outreach this, objective is to enhance the presence of the national transport safety board in the transportation system whereby, leadership and technical support is used as a factor in giving support to the safety issues in transportation, thus promoting the safety recommendations of the board, this is normally done by, advancing the technical understanding and awareness of the safety issues which reflects the leadership role in the workforce performance. The board also expands and performs procedures that always support the safety recommendations. The board also carries out the reviewing and analyzing the results of the recommendations, whereby the board chooses what measure is proved to be better. While playing its role of leadership the board usually solicit the support of external agencies which may be industries or the government, that assist in the bringing of the transportation issue to the awareness of the transportation society. [5] The board also ensures that, its workforce maintains its knowledge by giving them a chance to play the leadership role with the board and other agencies locally and internationally. The board seeks to improve the productivity of the employees and their satisfaction through a vigilant recruitment, performance compensation, having an interest on their personal needs. It also maintains a working environment that facilitates the performance and the fulfillment of the boards’ workforce. To deal with financial frauds, the board has come up with a resource management system, whereby it evaluates expenditures and fiscal commitments, so as to have an efficient asset management, to enable it have its mission accomplished, this course of management involves the budget implementation as a factor of performance for all stages of management. The reviewing of all actions and costs is carried out whereby; the board members expect the board to finish its mission at a considerable time and with the use of limited resources therefore the national safety board is expected to carry out more investigations on accidents in shorter time and with fewer resources. The cost accounting tools and methods is normally provided by the agency to the program officers so that they can manage resources more effectively. The boards’ performance is usually evaluated by the office of the management and supplemented by the boards’ annual financial audit. The national board of transportation safety provides a room for safety studies that is termed as an assessment of the effectiveness of rules, curriculum, program management and operational regulations and other government agency actions that are implemented to reduce the transportation losses; these studies result in the issuance of a narrative report on the information, conclusions and any valid recommendations on the safety of the travelers. They are normally scheduled irregularly about six weeks after a board meeting is carried out covering the same subject. The schedules for such meetings are usually presented under news and events on the boards’ website, and announced via a press release. [6] Since the board is basically an investigative agency, it carries out a special investigation that is divided into two segments, whereby the first one is defined as an effort of gathering any information concerning the programmed focus selected in support of safety studies under this a report is usually issued, but a file is usually preserved, this file normally contains details, circumstances, and conclusions but will not include the possible cause of the accident. While the second one is an examination of the mechanical issues and safety problems recognized in one or more accident investigations, under this a detailed narrative report is usually developed and approved by the Board, it contains the details, circumstances , conclusions and safety recommendations if necessary. All these records are always available from the boards’ records management division. References: Coyle, J.J.; Bardi, E.J. and Novack, R.A. (2004): Transportation. 5th Edn: Southwestern College Publishing, Cincinnati OFCM (1999): Public-Private Partnership Symposium: Panel on Successful Transportation Partnership; Presentation at the Volpe Center, Boston M A. TRB (2001): Critical Issues in Transportation 2002. Reprinted from TRB News 217; November-December 2001: Transportation Research Board, Washington, D.C TRB (2000): Highway Capacity Manual 2000. D.C.: Transportation Research Board. Washington [1] Coyle, J.J.; Bardi, E.J. and Novack, R.A. (2004): Transportation. 5th Edn: Southwestern College Publishing, Cincinnati [2] TRB (2000): Highway Capacity Manual 2000. D.C.: Transportation Research Board. Washington [3] Coyle, J.J.; Bardi, E.J. and Novack, R.A. (2004): Transportation. 5th Edn: Southwestern College Publishing, Cincinnati [4] [5] TRB (2001): Critical Issues in Transportation 2002. Reprinted from TRB News 217; November-December 2001: Transportation Research Board, Washington, D.C [6] TRB (2000): Highway Capacity Manual 2000. D.C.: Transportation Research Board. Washington Â